Microbit RRC-1258 MkII(s) Manual do Utilizador descarregar pdf (Página 79)

USER MANUAL

m crob t

RRC-1258 MKII

Ba1258B_RemoteRig_MkIIs-A33.docx

User manual

Rev. A33 – 2015 Jan 28

79 of 236

Ping settings (only Radio-RRC)

The Radio-RRC has a Ping Watchdog function which can be used as an extra security. This

function is quite common in network equipments. It can be set to ping an IP address and

when it does not get any answer, it will make a hard reboot of the RRC. The status of the ping

watchdog can be checked at the status page. This function is only available on the Radio-RRC.

Enable ping watchdog

Enables the function.

No = Function is disabled

Yes, test = Function enabled but it will not actually

reboot, can be used for test

Yes, reboot = Function is enabled.

IP address to ping

IP address to ping is entered here, In normal cases

use the Gateway IP.

Ping Interval (seconds)

Interval between the ping is sent.

(1-65535, default 300 s)

Startup delay (seconds)

Delay before the first ping is sent.

( 300-65535), default 300 s.

If Test mode is activated it can be set to 10-65535

Failure count to reboot

Sets how many times the ping is allowed to fail

before reboot is done. (1-255, default 3 )

1 2 ... 74 75 76 77 78 79 80 81 82 83 84 ... 235 236

Sem comentários

Microbit RRC-1258 MkII(s) Manual do Utilizador Página 79