Microbit RRC-1258 MkII(s) Manual do Utilizador descarregar pdf (Página 131)

USER MANUAL

m crob t

RRC-1258 MKII

Ba1258B_RemoteRig_MkIIs-A33.docx

User manual

Rev. A33 – 2015 Jan 28

131 of 236

Jumpers

Control-RRC:

JMP 1 = Yes

JMP 2 = Yes

JMP 3 = don’t care

JMP 5 = No

Radio-RRC:

JMP 3 = don’t care

JMP 5 = No

Connections

The cabling is quite simple and can be done with simple RJ connectors. Be aware of that the

HM-133/880 adapter boards must be used

Drawings of the connection cables can be found below.

Control-RRC:

 You have to make the control cable I22b to connect between the Control panel and the

RRC TTL connector. Mark up the cable so you connect the connectors to the right unit, it

will not work if you try to use it connected backwards.

 The microphone can be connected direct to the RRC AUX/MIC connector if you have a

microphone with RJ-45 connector.

 The speaker is connected direct to the RRC SP-jack with a 3.5 mm stereo plug.

Radio-RRC:

 You have to make the control cable I21b to connect between the Radio-RRC and the

Radio. Mark up the cable so you connect the connectors to the right unit, it will not work if

you try to use it connected backwards.

 Between the RRC AUX/MIC connector and the radios microphone jack you can connect a

standard patch cable (CAT5 or CAT6).

 The speaker signal from the radios external speaker jack to the RRC SP jack is connected

via a standard "off- the-shelf” cable with 3.5 mm stereo plugs in both ends.

HM-133/880 Microphone adapter boards

If you have a RRC-1258MkIIs you can buy the HM-133/880 adapter pcbs which are needed

for the function together with the IC-E880.

1 2 ... 126 127 128 129 130 131 132 133 134 135 136 ... 235 236

Microbit RRC-1258 MkII(s) Manual do Utilizador Página 131