Microbit RRC-1258 MkII(s) Manual do Utilizador descarregar pdf (Página 51)

USER MANUAL

m crob t

RRC-1258 MKII

Ba1258B_RemoteRig_MkIIs-A33.docx

User manual

Rev. A33 – 2015 Jan 28

51 of 236

Parameter

Setting

Program mode

Select the program mode depending on connected

radio:

0 = Transparent (for repeater links etc.)

1 = ICOM CI-V (generic)

2 = IC706 (with detached control panel)

3 = FT-8x7, FT-1000 (generic)

4 = Kenwood, Yaesu, Elecraft

5 = TS480/TM-D710 (with detached control panel)

6 =

(*1)

7 = IC-R2500/IC-2725(with detached control panel)

8 = TS-2000/TM-D700 (TS-2000 with RC-2000)

9 = IC-2820 (with detached control panel)

10 = Yeasu FT-950/FT-2K/FT-5K/FT-9K- Twin

11 = Transparent, 4-wire (for repeater links etc.)

12 = DX-SR8 (with detached control panel)

13 = ID-E880(with detached control panel)

14 = K3 twin

15 = Yaesu FT-857 (with detached control panel)

16 = Yaesu FT-100 (with detached control panel)

17 = Yaseu FTM-350 (with detached control panel)

(*1)

These selections are only possible in special

editions of the RRC.

Sip password

Protect your remote rig and should be same in both

ends. Normally shown as **** click on the “show”

button to view the password.

(default: no password)

Sip contact

Control-RRC:

Sets the fixed IP address or the Dynamic DNS “own

host name” to the Radio-RRC

Auto connect

Control-RRC:

When enabled the Control-RRC will connect to

Radio-RRC immediately after power up in program

mode 0, 1, 3 and 4.

No (default)

Yes

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 235 236

Comentários a estes Manuais

Sem comentários

Microbit RRC-1258 MkII(s) Manual do Utilizador Página 51

Comentários a estes Manuais

Manuais e produtos relacionados com Controlos remotos Microbit RRC-1258 MkII(s)