Microbit RRC-1258 MkII(s) Manual do Utilizador descarregar pdf (Página 38)

USER MANUAL

m crob t

RRC-1258 MKII

Ba1258B_RemoteRig_MkIIs-A33.docx

User manual

Rev. A33 – 2015 Jan 28

38 of 236

The Netmask is 255.255.255.0 the Netmask in the RRC:s should be the same

The Default gateway is 192.168.0.1 the Gateway in the RRC:s should be the same

In this case all the default IP setting will be OK.

In an other network, this is the result of the ipconfig command.

Your PC IP address in this example is 192.168.128.10 this means that the IP of the RRC:s

must have IP:s in the area 192.168.128.2 to 192.168.128.255.

The Netmask is 255.255.128.0 this the Netmask in the RRC:S should be the same

The Default gateway is 192.168.128.1 the Gateway and in the RRC:S should be the same

The DNS should in almost all situation be the same as Default gateway.

In this case you must change the IP:s of the RRC. I recommend to use 192.168.128.227 and

192.168.128.228

Use the Microbit Setup Manager to change the IP settings.

Select the Setup tab click on the “Get Setup” button and enter the IP addresses in the Setup

info dialog box.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 235 236

Sem comentários

Microbit RRC-1258 MkII(s) Manual do Utilizador Página 38