Microbit RRC-1258 MkII(s) Manual do Utilizador descarregar pdf (Página 142)

USER MANUAL

m crob t

RRC-1258 MKII

Ba1258B_RemoteRig_MkIIs-A33.docx

User manual

Rev. A33 – 2015 Jan 28

142 of 236

the controlling radio but there is no scale marks on the meters so you have to learn how the

different values are represented. For the FT-9000 – FT-9000 the sub RX must be active for

the ALC meter to work, and of course the spectrum scope does not work remotely.

Attention!

If you want to use the Auto tuner on the Remote radio, it’s very important that you connect

dummy loads to the corresponding antenna ports on the control radio. As the radio do not use

full power when tuning and it’s done relatively fast, small and cheap 10-20W dummy loads

can be used (not included).

Hardware configuration

In the standard RRC:s the strappings are done manually by the customer, but In the RRC-

1258MkIIs Yaesu Twin package the strappings are done by a small pcb marked 1258Y which

is assembled at the strapping area. The small pcb is removable if you later want to use the

RRC:s for some other configuration. When you replace it is important that the notch which

marks pin one is placed according to the picture below.

For your reference the picture below shows how the strappings are done on the small pcb.

1 2 ... 137 138 139 140 141 142 143 144 145 146 147 ... 235 236

Sem comentários

Microbit RRC-1258 MkII(s) Manual do Utilizador Página 142