Microbit RRC-1258 MkII(s) Manual do Utilizador descarregar pdf (Página 58)

USER MANUAL

m crob t

RRC-1258 MKII

Ba1258B_RemoteRig_MkIIs-A33.docx

 Microbit 2.0 AB 2010. All rights reserved

a

User manual

Rev. A33 – 2015 Jan 28

58 of 236

Mode 6 = CAT to COM2 local (Control-RRC)

makes it possible to connect for example a

logger PC which needs to speak to the

Control radio to COM1 at the Radio-RRC.

The IP-data from radio side COM2 and this

local COM1 will be intelligent

mixed (in sequence) before sent to local

COM2. Data from local COM2 goes to both

local COM1 and to the radio side COM2

via IP. This function is only for the Yaesu

Twin configuration only.

Mode 6 = CAT to COM2 local (Radio-RRC)

makes it possible to connect other hardware

which needs to speak to the radio via COM1

at the Radio-RRC. The IP-data from control

side COM2 and local COM1 will be intelligent

mixed (in sequence) before sent to local

COM2. Data from local COM2 goes to both

local COM1 and to the control side COM2

via IP. Can be used for MicroHam, the Web-

Switch, Power Amplifier etc. This function is

for Yaesu, Kenwood and Elecraft only.

Mode 7 = CAT to COM2 local & remote (Radio-RRC)

Same function as above but it also com-

bines data sent from COM1 in Control-RRC

with data from the local COM1 and Control-

RRC COM2. (Remember that this function

doubles the data amount sent over the

Internet).

Mode 7 = CAT to COM2 remote (Control-RRC)

Is used in combination with mode 7 at the

Radio-RRC.

Mode 8 = The WinKeyer emulator is activated, and

data received from COM1 are sent as CW

from the Radio-RRC in parallel with the

ordinary keyer.

COM1 baudrate

Set COM1 baudrate [bps]:

600

1200

2400

4800

9600 (default)

19200

38400

48000

57600

COM1 databits

Set COM1 data bits:

5

6

7

8 (default)

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 235 236

Comentários a estes Manuais

Sem comentários