Microbit RRC-1258 MkII(s) Manual do Utilizador descarregar pdf (Página 101)

USER MANUAL

m crob t

RRC-1258 MKII

Ba1258B_RemoteRig_MkIIs-A33.docx

User manual

Rev. A33 – 2015 Jan 28

101 of 236

Connections

PAD – Control-RRC:

Only the USB interface can be used for RTTY as described above.

PAD – Radio-RRC:

At the Radio-RRC the PAD-jack can be used to connect the RTTY signal from the FSK serial

port. The PAD will then be shared with CW key output. The pad jack is for a standard 3.5 mm

stereo plug. Note - these signals are also available in the I/O-connector.

Signal

PAD jack

IO setting

keyer-output

tip

keyer-output

ring

OUT1 mode = Baudot/45

gnd

inner ring

USB – Control-RRC:

A PC with a suitable software like MMTTY can be used to perform the RTTY keying. Together

with the RTTY keying signal PTT need to be activated this is done by activating the RTS signal

in the virtual comport (COMExtra). MMTTY does this by default other software may need

manual configuration.

I/O-connector – Radio-RRC:

The output signal for the RTTY keying can also be found in the I/O connector.

Signal

I/O connector

IO setting

RTTY- output

5 (OUT0)

OUT0 mode = Baudot /45

RTTY -output

6 (OUT1)

RTTY -output

3 (OUT2)

gnd

The I/O connector can also be used for the PTT signal if the Mic PTT is not used. If you want

this function change one of the free outputs to PTT.

1 2 ... 96 97 98 99 100 101 102 103 104 105 106 ... 235 236

Comentários a estes Manuais

Sem comentários

Microbit RRC-1258 MkII(s) Manual do Utilizador Página 101

Comentários a estes Manuais

Manuais e produtos relacionados com Controlos remotos Microbit RRC-1258 MkII(s)