Microbit RRC-1258 MkII(s) Manual do Utilizador descarregar pdf (Página 206)

USER MANUAL

m crob t

RRC-1258 MKII

Ba1258B_RemoteRig_MkIIs-A33.docx

User manual

Rev. A33 – 2015 Jan 28

206 of 236

Logging or computer control, RTTY etc.

Even if the CAT connector at the Remote K3 is occupied with the communication between the

two K3:s it is possible to connect other equipment to the system due to an intelligent CAT

server functionality in the RRC.s. If you need to connect a antenna switch for example which

need to talk to the remote K3 you can connect it to the Radio-RRC COM1 and configure COM1

to “Mode 6, CAT to COM2 (local)”.

If you want to connect a logging or PC-control software to the system you can connect it to

the Control-RRC COM1 via RS-232 or USB and configure both RRC:s COM1 to “Mode-7, CAT

to COM2 (local&remote)”. Then all commands go to and from the Remote K3 over the

network. You can still use the remote antenna switch as described above.

Independent of the connections above you can use the K3:s FSK transmission. Configure

Radio-RRC “OUT1 mode = Baudot/45” and use the Virtual USB port COMExtra for the RTTY

software. The supplied ACC cable are wired to key the K3 FSK input.

1 2 ... 201 202 203 204 205 206 207 208 209 210 211 ... 235 236

Sem comentários

Microbit RRC-1258 MkII(s) Manual do Utilizador Página 206