Microbit RRC-1258 MkII(s) Manual do Utilizador descarregar pdf (Página 52)

USER MANUAL

m crob t

RRC-1258 MKII

Ba1258B_RemoteRig_MkIIs-A33.docx

User manual

Rev. A33 – 2015 Jan 28

52 of 236

Audio quality

Sets the audio quality depending on available

bandwidth. Sample rate must be same in both RRC

but coding can be different (more information can

be found in appendix-A Audio coding):

0 = A-law 8 kHz

1 = Linear 12 bits 8 kHz

2 = Linear 16 bits 8 kHz (default)

3 = A-law 12 kHz

4 = Linear 12 bits 12 kHz

5 = Linear 16 bits 12 kHz

6 = A-law 16 kHz

7 = Linear 12 bits 16 kHz

8 = Linear 16 bits 16 kHz

9 = A-law 24 kHz

10 = Linear 12 bits 24 kHz

11 = Linear 16 bits 24 kHz

12 = IMA ADPCM 4 bits 8 kHz

12 = IMA ADPCM 4 bits 16 kHz

Audio Dual-RX

Sets if LF from the Sub-RX should be sent as an

separate audio channel. Be aware of that this

doubles the need of Bandwidth. (Only available in

the (s) version.)

Codec out gain

Sets the attenuation for the audio output, in 255

steps and 0.5 dB per step. Should always be set to

255.

255 = no attenuation (default)

254 = -0.5 dB

253 = -1.0 dB

…

0 = max attenuation

Codec inp gain

Sets the gain for the audio input in 63 steps and

0.75 dB per step. Should be 18 at Control-RRC for

high level electret microphones and should always

be 0 at Radio-RRC.

0 = default Radio-RRC

…

18 = default Control-RRC

…

63 = max value

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 235 236

Comentários a estes Manuais

Sem comentários

Microbit RRC-1258 MkII(s) Manual do Utilizador Página 52

Comentários a estes Manuais

Manuais e produtos relacionados com Controlos remotos Microbit RRC-1258 MkII(s)