Microbit RRC-1258 MkII(s) Manual do Utilizador descarregar pdf (Página 14)

USER MANUAL

m crob t

RRC-1258 MKII

Ba1258B_RemoteRig_MkIIs-A33.docx

User manual

Rev. A33 – 2015 Jan 28

14 of 236

RXD (in)

GND

CTS (In)

RTS (Out)

AUX/MIC

The AUC/MIC connector (RJ-45) is used for microphone connection or for connection of the

radio control panel (IC-703/706, DX-SR8). Inside the RRC behind the connector is a set of

straps with can be used to decide how the connector should be configured depending on radio

or microphone. The red and yellow LED:s are indicating SIP-status:

LED

LED Red

LED Yellow

Off

Incoming audio stream OK

SIP disconnected

Flashing

SIP connection failed

Incoming audio stream fail

SIP connection OK

Pin no

AUX (RJ45)

depends on the inside straps

TTL Control-RRC

The TTL connector on Control-RRC (RJ-12) is used primary for connection of the radio control

panel (TS-480, RC-2000 and IC-E2820) and in other cases where you need to connect via a

TTL level (5V) port. The connector is configured so a straight cable can be used to a TS-480

and RC-2000 control panel.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 235 236

Sem comentários

Microbit RRC-1258 MkII(s) Manual do Utilizador Página 14