Microbit RRC-1258 MkII(s) Manual do Utilizador descarregar pdf (Página 12)

7. Disconnect the USB cable between and connect both the RRC-1258 control site unit with the CW knob

and the computer to your LAN (Figure 8). Note that the PWR light on the RRC-1258 unit’s front panel

stops blinking and remains on, indicating communications with the router. If it continues to blink, check

to ensure the cable connectors are fully inserted and that you have a good cable. You must have a steady

green PWR light to proceed.

Figure 8

8. Open your computer browser and enter the I.P. address of the RRC-1258 unit on the browser’s address

bar to open the Microbit program window shown in Figure 9. Unless you changed it in step five, the I.P.

address is 192.168.1.169. Click on Radio in the left menu to open the screen shown.

Figure 9

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 26 27

Sem comentários

Microbit RRC-1258 MkII(s) Manual do Utilizador Página 12